Monday - Friday 8:00 a.m. - 4:00 p.m.
Saturday 8:00 a.m. - 12.00 p.m.
APS Aeon 2 active monitor
|Item number / Code:|
218705 / APS-AEON-2
|Current availability:||0 pcs.|
|This item is no longer available. Please contact our team for alternative products.|
APS Aeon 2 active monitor, APS AEON-2, APS AEON 2, APS AEON2, AEON-2, AEON 2, AEON2
APS Aeon 2
The AEON 2 features two unique Class AB amplifiers designed to deliver power to the speakers with very low non-linear distortions at both low and high sound levels. They are fitted with an extremely efficient power supply, providing enough power even at the highest SPL.
The High Definition soft dome tweeter with a wide surround combines high frequency dispersion of a 3/4” dome with low frequency characteristics of a 1” dome. Large ferrite magnet ensures high efficiency, good transient response and low distortions.
The custom made, high-fidelity long throw woofer/midrange unit with a hard cellulose cone is fitted with a strong, perfectly optimized magnetic circuit to ensure minimal distortions and provide excellent transient response and high dynamics.
Perfectly tuned box and midwoofer along with special spectral shaping plus the two mentioned, unique Class AB power amplifiers, allow to achieve a sound, usually associated with much bigger high-fidelity studio monitors.
Sophisticated electronic systems ensure faithful signal transfer from the monitor’s input stage into the ears of sound engineer, maintaining all the original characteristics of audio material.
Instead of the usual backlit logo, a white glow at the rear of the monitor indicates that the unit is on.
AEON 2 plays loud and with no distortions - it's a precision tool for professionals!
• Field Monitor: Bass Extender
• Type: Active; D class hi-eff. pow. amp.
• System: One-way
• Crossover Frequency: controlled: 40-100Hz
• Dimensions HxWxD: 37x28x35cm: 14.6x11x13.8”
• Free field freq. response: ± 2.5 dB: 21 Hz - 100 Hz
• SPLmax @ 1m, free field:RMS: 104 dB (single); peak: 112 dB (pair)
• Weight: 16 kg; 35.3 lbs. (single)
• Woofer: 23 cm; 9”; stiff PP cone; large rubber surround
• Amplifier: 400 W RMS @ 4 Ohms
• THD+N: 0.004%max @ 1 W; 0.05%max, Pmax/2, 20Hz-20kHz
• Input Voltage Level: 0 dBu (0.775 V) - VOLUME 0dB - for 100dB SPL @ 1m, free field
• Power amp. protections: Pop-free start/stop control, DC-fault detection, over-current/voltage protection
• Clipping: LED
• Interferences and Hums: Ground-lift switch for prevention
|Amplifier Power (RMS)||325 W|
|Maximum SPL||116 dB|
|Frequency range from||38 Hz|
|Frequency range up to||33 kHz|
|Manual frequency correction||yes|
|Analog XLR input||yes|
|Analog Jack Input||yes|
|Analog RCA input||no|
|dimensions||370 x 220 x 384 mm|